Oasis

• DESCRIPTION
  • Designed to fit roll post shelving systems.
  • Twenty five standard sizes to suit 300 mm, 400 mm, 450 mm, 500 mm & 600 mm deep shelving.
  • Resistant to most industrial solvents.
  • Integral back stop for clear viewing of PANDA BIN contents.
  • Partitions are notched to ensure positive location within the bins.
  • PANDA BINS feature a small handle to allow maximum area of the front face for sticking identification labels.

• DESCRIPTION
  • Strong rear lip for use with louvre panels or rails.
  • Strong heavy duty reinforced base, sides & stacking rim.
  • Resistant to most industrial solvents.
  • Bins are designed to stack one on top of each other.
  • Clear access to contents.
  • All bins with identification card holders.
  • Stopper prevents stacked bins from shifting forward.
  • Incorporates a safety stop feature in SB 4 / 5 / 6 at the back for use on shelves.

• DESCRIPTION
  • Designed to fit roll post shelving systems.
  • Twenty five standard sizes to suit 300 mm, 400 mm, 450 mm, 500 mm & 600 mm deep shelving.
  • Resistant to most industrial solvents.
  • Integral back stop for clear viewing of PANDA BIN contents.
  • Partitions are notched to ensure positive location within the bins.
  • PANDA BINS feature a small handle to allow maximum area of the front face for sticking identification labels.

• DESCRIPTION
  • Strong rear lip for use with louvre panels or rails.
  • Strong heavy duty with rounded base, sides & stacking rim.
  • Resistant to most industrial solvents. 
  • Can be stacked one on top of each other.
  • Clear access to contents.
  • Hippo bins are designed to stack one on top of each other.
  • All bins with identification card holders.
  • Partitions available.
  • Stopper prevents stacked bins from shifting forward. 
  • Rounded ergonomic design to give extra strength and sturdiness for storage.

Roll posts

Panda Shelving Systems have one-piece solid uprights with a rolled
front edge for additional strength, safety and aesthetic appeal. Roll
posts are available in 1875 mm height which is suitable for
400mm deep shelves.

Shelves

Shelf levels are easily adjusted in 25mm increments and are held
into position with the use of nuts / bolts Shelves are available
in 400mm depth having 900mm width as standard.

Back plate

Back panel provide additional stability and prevents dust.

Kick plates

All shelving bays are fitted with solid kick plates, which prevent
unwanted material to enter inside the base of the shelving unit and
It looks aesthetically good.

Flexibility

Panda shelving systems are fully enclosed and are designed to suit
your ever changing needs. The flexibility of the product accommodates
additions or alterations at any stage, with a minimum of fuss or
disruption to your day to day operation.

Finish

All Panda shelving components are manufactured in 0.8mm
specially treated steel to make it ESD safe.

BINS / ROLL POSTS / BACK PLATES / SHELVES
can be ordered separately as per your requirement.

Roll posts :
Panda Shelving Systems have one-piece solid uprights with a rolled front edge of diameter 20mm for additional strength, safety and aesthetic appeal.  Roll posts are available in four heights 1275mm, 1875mm, 2175mm & 2375mm which are suitable for 300mm, 400mm, 450mm, 500mm & 600mm deep shelves. 

Back Panel :
Back panels provide additional stability and prevents dust intrusion.

Extended Back Panel :
Extended back panels can be added along with additional roll posts to expand the existing units, side by side or back to back.
As per the design the extended back panel is a set consisting of two pcs. i.e. 482mm wide and 457mm wide in four standard heights 1275mm, 1875mm, 2175mm and 2375mm.

Back Bracing :
Back bracing can be used instead of solid back panels as an economical solution. Back Bracing is made from CRCA Steel 2mm thickness and duly powder coated in Light Grey RAL 7035 colour. In 1275mm Height shelving systems single set of back bracing to be used. In 1875mm, 2175mm & 2375mm shelving systems two sets of back bracing are to be used.
Art No : ASUBB 

Kick plates :
All shelving bays are fitted with solid kick plates, which prevent unwanted material entering into the base of the shelving unit and it looks aesthetically good. Height of the kick plate is 45mm.
Shelves :
Shelf levels are easily adjusted in 25mm increments and are held into position with  the use of easy clips or nuts & bolts. Shelves are available in 300mm, 400mm, 450mm, 500mm  & 600mm depth having 900mm width as standard.